词语:转台热度:169

词语转台拆分为汉字:

转字的拼音、笔画、偏旁部首、笔顺、繁体字,转字字源来历,转字演变

1. 转 [zhuǎn]2. 转 [zhuàn]3. 转 [zhuǎi]转 [zhuǎn]迁徙;流亡:老弱~乎沟壑。不直接的,中间再经过别人或别的地方:~送。~达。~发。~运。周~。改换方向:~弯。向左~。改变位置:~移。改变形势、情况:~……

台字的拼音、笔画、偏旁部首、笔顺、繁体字,台字字源来历,台字演变

1. 台 [tái]2. 台 [tāi]台 [tái]高平的建筑物:亭~楼阁。敬辞,用于称呼对方或与对方有关的事物:~鉴。~甫。像台的东西,器物的座子:井~。窗~。灯~。量词:一~戏。台湾省的简称:~胞。~币。姓。桌子、案子:写字~。发生在……

 

查询词语:转台

汉语拼音:zhuàn tái

词语转台基本解释

1.中心部分能够旋转的舞台。在这种舞台上演出,能够缩短换景的时间。

2.能转动的平台。

词语转台详细解释

  1. 中心部分能够旋转的舞台。在这种舞台上演出,能够缩短换景的时间。

  2. 能转动的平台。

词语转台在线造句

  1. Traditional UAS targeting technology needs optical turret load Laser Rangefinder. So optical turret must be double payload at least.

    传统的无人机目标定位技术要求光电转台必须装配激光测距仪,因此光电转台至少是双装载。

  2. The experimental results show that the system works stably and reliably , satisfying the requirement of the antenna automatic measurement.

    实验证明,该转台控制系统工作稳定可靠,完全满足天线自动测量的要求。

  3. Designed method of a modified repetitive controller is proposed and its application to high-frequency angular-vibration table is introduced.

    针对高频角振动转台在高频段跟踪周期信号的精度低问题,提出一种改进重复控制器设计方法。

  4. Turntable can simulate a variety of aircraft's movements in the air. it has been widely used in aerospace and defense industry.

    转台能够模拟各种飞行器的运动姿态,广泛应用于航空航天和国防工业中。

  5. The experiment result shows that the system keeps up perfect tracking performance when the loads of the flight simulator are changed.

    实验结果表明,当转台的负载发生变化时,系统仍然能够保持良好的跟踪性能。

  6. we have longer commercial breaks between programs, so the viewers are a lot more likely to switch to another channel during the breaks.

    我们则在两个节目之间播放较长时间的广告,观众在插播广告时转台的可能性更大。

  7. Thus, it has vital significance to research the application of fuzzy control for the control system of the hydraulic simulation turntable.

    因而,研究模糊控制在液压仿真转台控制系统中的应用具有重要的意义。

  8. The feedback controller and prefilter were designed using QFT, which make up of the control system of a certain flight simulator.

    采用QFT设计了某型飞行仿真转台的反馈控制器和前置滤波器,组成了转台的控制系统。

  9. The assembling error of three-axis turntable is unavoidable during assembling process, which is one of the primary system error sources.

    作为造成三轴转台最终误差主要的系统误差源,装配误差在装配过程中难以避免。