词语:减压阀热度:318

词语减压阀拆分为汉字:

减字的拼音、笔画、偏旁部首、笔顺、繁体字,减字字源来历,减字演变

由原有数量中去掉一部分:~价。~员。缩~。削~。偷工~料。降低程度,衰退:~轻。~弱。~少。~色。~产。~免。~缓。……

压字的拼音、笔画、偏旁部首、笔顺、繁体字,压字字源来历,压字演变

1. 压 [yā]2. 压 [yà]压 [yā]从上面加力:~住。~碎。~缩。泰山~顶。用威力制服、镇服:镇~。~服。~迫。控制,使稳定,使平静:~价。~住阵脚。搁置:积~。逼近:大兵~境。赌博时在某一门上下注:~宝(亦作“押宝”)。压 [……

阀字的拼音、笔画、偏旁部首、笔顺、繁体字,阀字字源来历,阀字演变

古代指有权势的家庭:门~。~阅(封建时代指有功勋、有权势的世家。亦作“伐阅”。凭借权势造成特殊地位的个人或集团(含贬义):军~。财~。党~。机器中调节流体流量、压力和流动方向的装置,如:截止阀、单向阀、减压阀、安全阀等。亦称“阀门”、“活门……

 

查询词语:减压阀

汉语拼音:jiǎn yā fá

词语减压阀在线造句

  1. Common pressure-relief devices are a pressure-relief valve for primary protection and a rupture disc for secondary protection.

    常用的减压装置是一个作为主要保护的减压阀和一个作为二级保护的破裂盘。

  2. Built-in pressure relief valve to protect the unit against any abuse from strong pressure or strong wind when closing the door.

    内置减压阀,防止因外来强压或强风状态下闭门而造成地弹簧损坏或漏油。

  3. sec The PORV (pressure relief valve) opens automatically, releasing steam into a holding tank.

    秒减压阀自动打开,将蒸汽释入一个储存罐。

  4. Built-in relieve value, prevent damaging the main unit and oil leakage caused by shutting the door by strong pressure or wind.

    内置减压阀,防止因外来强压或强风状态下闭门而造成的主机损坏或漏油。

  5. Otherwise deal with air filter relief-pressure valve for routine maintenance, ensure that the air dry, no pollution.

    否则应对空气过滤减压阀进行日常维护保养,确保输入空气干燥、无油污。

  6. The performance test of reduced pressure valve and the length-of-life test system were developed.

    研制了减压阀的全自动性能与寿命试验系统。

  7. Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.

    液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.装配面

  8. In a modulating period T as to an ideal decompression valve voltage wave is complete the same as the displacement wave of valve core.

    对一理想的减压阀在一个调制周期T内,电压波形与阀芯位移波形完全相同。

  9. The PORV light goes out, indicating that the valve is now closed. The valve is actually still open.

    减压阀指示灯熄灭,表明阀门当前已关闭。阀门事实上还开着。

词语减压阀百科解释:

减压阀

减压阀是通过调节,将进口压力减至某一需要的出口压力,并依靠介质本身的能量,使出口压力自动保持稳定的阀门。从流体力学的观点看,减压阀是一个局部阻力可以变化的节流元件,即通过改变节流面积,使流速及流体的动能改变,造成不同的压力损失,从而达到减压的目的。然后依靠控制与调节系统的调节,使阀后压力的波动与弹簧力相平衡,使阀后压力在一定的误差范围内保持恒定。