词语:回弹热度:376

词语回弹拆分为汉字:

回字的拼音、笔画、偏旁部首、笔顺、繁体字,回字字源来历,回字演变

还,走向原来的地方:~家。掉转:~首(回头看)。~顾。~眸。~暧。妙手~春。曲折,环绕,旋转:~旋。~肠。~廊(曲折回环的走廊)。答复,答报:~信。~话。~绝。量词,指事件的次数:两~事。说书的一个段落,章回小说的一章:且听下~分解。中国少……

弹字的拼音、笔画、偏旁部首、笔顺、繁体字,弹字字源来历,弹字演变

1. 弹 [dàn]2. 弹 [tán]弹 [dàn]可以用力发射出去的小丸;装有爆炸物可以击毁人、物的武器:~丸。子~。~雨。枪~。氢~。导~。手榴~。原子~。古代指以竹为弦的弓:“左挟~,右摄丸”。弹 [tán]用手或工具拨动而发射出去……

 

查询词语:回弹

汉语拼音:huí tán

词语回弹基本解释

从弄弯的状态或位置弹回到正常的状态或位置的动作。

词语回弹详细解释

词语回弹在线造句

  1. It looked as if he had been endowed with the elasticity of a ball, and rebounded each time his feet touched the ground.

    它看起来好像他已经被赋予球的弹性,而且每次回弹他的脚碰触地面。

  2. When the ball first bounces off the ground at frame 50, it seems to float and slip rather than rebound.

    在50帧的时候球第一次弹到地面,看起来像浮动跟滑动,而不是回弹。

  3. The inner seat comprises a hollow main body and a rebounding part connected to two inner sides of the main body and capable of deforming.

    内座包括中空的主体以及连接该主体上两内侧边并可变形的回弹部。

  4. Australia's economy bounced back in the last quarter as it looked to recover from earlier floods and cyclones.

    今年第二季度,澳大利亚经济迅速回弹,已从先前的洪灾、飓风中恢复。

  5. The surface deflection has linear change with base thickness and curve changes with subgrade resilient modulus and base resilient modulus.

    表面弯沉随基层厚度呈线性变化,随土基回弹模量和基层回弹模量呈曲线变化。

  6. The discus landed, but having fallen from such a great height it bounced and violently struck Hyacinthus in the head.

    铁饼落地了,但是它的落距如此地大,它回弹了起来并重重击中了雅辛托斯的头部。

  7. there is not enough tension to and not rebound in the silk screen, Business card printing and membership card making easy-to-shape.

    压辛不敷丝网又充足回弹辛,制卡和会员卡制息历程洋难伸长变形。

  8. She smiled to smile, and then turned to once play slot to roll son and said to him, if is an empty gun, the An depends on you!

    她笑了笑,又转了一回弹槽滚儿,对他说,如果是空枪,俺就依你!

  9. Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam .

    同时,应用该回弹势能原理于纯弯曲梁的回弹变形计算。

词语回弹百科解释:

回弹

通常物理反弹回弹指通常物理反弹 指物体在力的作用下产生物理变形 当压力释放时所产生的还原或近还原的状态的物理变化用手按用力住一轻质弹簧使弹簧发生物理变化当手松开或用力减小时弹簧会发生趋向复原的现象叫回弹回弹回弹是用来说明当去除成型工具的压力时成型的部件所产生的尺寸变化其产生的原因有两点首先当施加压力时工具挠曲但利用现代化设备这应当不成为问题第二和许多材料一样不锈钢也有一些弹性恢复例如如果对不锈钢进行折边折的角度应比所需角度大一些这样当去掉压力时就能使它回弹到所需角度同样在设计冷弯冲床模具时应包括回弹余量例如为在不锈钢上获得90度的角模具的坡口角度可能是80度